Magnum III Auto Loading Wheel Lift Underlift System



This System is UNLIKE ANY OTHER ON THE MARKET TODAY!!! Read below for more info

LIFT CAP: -4,000# Lbs at full extension
7,200# Lbs Fully Retracted
TOW CAP: -7,500# Lbs
REACH: -72"
DRAWBAR WIDTHS: - 80" / 88"

Specs and Information:
*Offers fully remote, Hydraulic Operation (3.2 gpm @ 2,800psi)

(compare to other brands (1.5 - 3.0gpm @ 1,800psi)

*Dual Elect/Hydraulic Pump System for greater flow and faster operations
*Convertible to Clutch Pump System Quickly and Easily (Addtl Charge)
*Unique and Proprietary Steel Tubing used for Lift Sections. While all other brands use standard OEM produced seamed tubing that is produced using an extrusion process, Ours is produced as Round Seamless 3/8" Wall Tubing which is then Hot Drawn through Mandrel to produce the Rectangle Shape with 1/4" wall and an ID tolerance of less than 2/1000ths inch SEAMLESS TUBE. The ID of the Lower Unit Tube has been custom sized to fit the extension tube with such a tight tolerance that the wear pads DO NOT REQUIRE HARDWARE of any type too hold in place. While others must either screw or rivet in place to keep pads from kicking out. Our tubing carries a MUCH HIGHER SPEC and CAPACITY RATING as well. While the lift and tow capacities are very similar through all brands, the difference lies in the percentage of de-rate for advertised capacities.

Another example is in the King Pin / Pivot Pin Assembly. While others have all used what has become an industry standard type assembly, which has inherent flaws concerning durability, we go that extra step. By not only using a higher grade stock, but adding thrust washers between plates, as well as having an additional bolt assy threaded into the bottom of the pin through the bottom plate. This means, GREATER STABILITY, DURABILITY, less wear and tear, lower maint Costs and MUCH longer replacement Life.

L-Arm outer sections are removable for towing with trailers, by adding optional trailer hitch attachment. Also allows for gooseneck and fifth wheel trailering.

THIS IS A TRUE COMMERCIAL GRADE TOWING SYSTEM DESIGNED TO TOW 600+ VEHICLES PER YEAR. If a lighter unit towing under 200 units per year is what you need, then please check out the Z-Series Underlifts.

The cost is HIGHER because the Capacities, Useful Life and durability is Much Greater!!! These units are designed too MAKE YOU MONEY AND STAY MAKING YOU MONEY. If the $1,000 difference makes a difference and down time and replacement times do not get the point.

  • Model: PE-MIII-4
  • 2 Units in Stock
  • Manufactured by: Pruitt Enterprises

This product was added to our catalog on Wednesday 04 February, 2015.

Phoenix USA NEW
Your IP Address is:
Copyright © 2017 Wrecker Source. Powered by Zen Cart
Champion Genetics Bottom Banner